Industrial Cleaners Floor Cleaner Product Line Leaders

1. Tru Clean 3000 - low pH, oil emulsifying cleaner for cleaning tough soils from floor surfaces. It works effectively in automatic floor scrubbers or with mop and bucket to permit effective cleaning in all areas of an industrial plant. The low concentrate pH enables compliance with effluent pH restrictions imposed by many municipalities, and makes it non-corrosive to aluminum equipment components. Product is solvent free so it produces no VOC’s, helping eliminate waste treatment problems associated with solvent containing products. Cleaned floors are not slippery when dry, for safer conditions. 2. Tru Clean 3001- Heavy-duty liquid alkaline maintenance cleaner intended for cleaning floors and equipment. Effective in removal of cutting oils, extrusion oils, coolants, lube oil and greases. Also very effective in removing forklift tire marks. Product is environment friendly and does not contain any butyl cellosolve, phosphates, nitrates, nitrites or phenols. Product is solvent free so it produces no VOC’s -- waste treatment problems associated with solvent containing products are eliminated. Leaves the floors clean not slippery to help improve house keeping efforts. 3. Tru Clean 3004 – Heavy-duty, solvent containing floor cleaner. Designed specifically to dissolve & remove heavily caked on pigmented drawing compounds, forklift tire marks, chlorinated stamping compounds, moly-containing extrusion oils, and greases. Effective for use in automatic floor scrubbers or with a mop and bucket to permit effective cleaning in all areas of an industrial plant. Floors are left clean not slippery for safe working conditions.

Part Cleaner Product Line Leaders

1. Tru Clean 6000 - heavy-duty liquid caustic cleaner for use in both spray and immersion applications. It is formulated to remove difficult soils such as pigmented drawing compounds, heavy oils and greases from ferrous metals. Provides exceptional short-term corrosion protection and should be used in the rinse stage of the cleaning operation for good interim rust protection. Rejects the oils it removes so they can be easily skimmed away to provide a long bath life. Can also be used as a neutralizer following acid rust stripping of parts or acid de-scaling of washers. Not recommended for use on non-ferrous metals such as brass or copper. Typical dilution is 24 parts water to 1 part concentrate. 2. Tru Clean 6001 – Medium-duty liquid cleaner and rust inhibitor. Rejects the tramp oil it removes so tramp is easily skimmed away to provide a long bath life. Effective on ferrous and non-ferrous alloys. Provides good rust protection for short-term storage of finished goods. Typical dilution is 24 parts water to 1 part concentrate.